淺談乘客電梯選購原則

Discussion on the principle of passenger elevator selection and purchase

乘客電梯選購原則 對于選購乘客電梯來說，主要是賓館與寫字樓的用戶。

The principle of passenger elevator selection is mainly to the customers of the hotel and office building for the passenger elevator.

那么乘客電梯到底該如何選擇電梯呢？

So how does the passenger elevator choose the elevator in the end?

首先要確定建筑的定位，其次是確定人流量，三是考慮等候時間，四是確定貴州電梯速度與載重量，

First of all, we must determine the location of the building, the next is to determine the flow of people, three is to consider the waiting time, the four is to determine the speed and load of the elevator in Guizhou,

貴州電梯認為最高檔的電梯選擇要求是在30秒內直駛到達頂層；中高檔建筑直駛在40秒內到達頂層；中檔建筑直駛在45秒內到達頂層。按這樣計算，就可以用你建筑高度除以速度即可進行速度的選擇。

Lift the most high-end choice is made in 30 seconds to reach the top; in the high-end building did reach the top in 40 seconds; mid-range building straight to reach the top in 45 seconds. In this way, you can use the height of your building by speed to choose the speed.

其次是人流量的確定。一般來說，寫字樓流量大，因此電梯需要從群控上去考慮，從電梯數量與速度的綜合考慮來滿足需要；賓館一般用并聯與群控結合的方式，那就還要考慮賓館的房間數量與星級標準。中低層三星級以下一般用兩臺并聯基本滿足需要了。

The next is the determination of the flow of human beings. Generally speaking, office buildings have large traffic volume. Therefore, elevators need to be considered from group control. From the comprehensive consideration of elevator quantity and speed to meet the needs, hotels usually use the way of combination of parallel and group control, so we also need to consider the number of rooms and star standards of hotels. In the low and middle level, the following three three - star level in parallel basically meet the needs of two parallel.

由于寫字樓與賓館都是運行性質的，所以需要從節能與安全上去考慮選擇電梯產品。

As the office building and the hotel are operating in nature, it is necessary to choose the elevator products from energy saving and safety.

面前國內的乘客電梯采用節能電乘客電梯可以滿足2.5M/S的要求，就是說，高檔寫字樓如果是90米以下都足夠滿足了。而賓館也同樣可以滿足15層以下的四星級賓館要求了。節能電梯對運行的管理公司來說十分重要，一般可以比普通電梯節約三分之一的耗電。

The passenger elevator in front of us can meet the requirement of 2.5M/S by using the energy-saving electric passenger elevator. That is to say, if a high-grade office building is below 90 meters, it will be enough. And the hotel also can meet the requirements of the four star hotel under 15 layers. The energy saving elevator is very important for the running management company, which can save 1/3 of the power consumption than the ordinary elevator.

由于乘客電梯不比住宅電梯，因此裝潢上都要有所要求，一般轎廂采用蝕刻不銹鋼，也可以下面1.2M采用與上面不同的裝修。層門一般首層標準就是法文不銹鋼，那么乘客電梯首層該換與轎廂裝潢匹配的比較好。而乘客電梯一層普遍采用大門套的形式是大多數客戶的選擇。

Because passenger elevator is no more than elevator for housing, all decorations are required. Generally, the car adopts etched stainless steel, or 1.2M can be decorated differently from above. The first floor standard of the door is French stainless steel, so the first floor of the passenger elevator should be well matched with the car upholstery.  It is the choice of most customers that the passenger elevator is widely used in the form of door cover.

在安全上，必須考慮是否符合雙向安全的要求，其次是緩沖形式，其三是斷電后如何急救。

In security, it is necessary to consider whether it meets the requirements of two-way safety, and the second is the form of buffer, and the third is how to first aid after power failure.